Auto Volumetric Wire Bead Cold Press
Automatic cold press for green compacting wire saw bead with granulated metal powders, designed to be fitted upon diamond wire beads with single cavity mold or two cavities as option color touch monitor. Fully electronic adjustment of weighing height by electric engines.
AUTO VOLUMETRIC WIRE BEAD COLD PRESS
MODEL NO. WP5AE
Automatic cold press for green compacting wire saw bead with granulated metal powders, designed to be fitted upon diamond wire beads with single cavity mold or two cavities as option+color touch monitor. Fully electronic adjustment of weighing height by electric engines.
TECHNICAL DATA
- MODEL NO. : WP5AE
- POWER SUPPLY : 380V, 3 PHASES, 50/60Hz
(Different voltages and frequencies on request)
- MAX POWER CONSUMPTION : 8KVA
- COMPRESSOR FORCE : Electrro Engine Pressure from 0kg to 7,000kg
AIR PRESSURE SUPPLY : 6 ~ 8 BARS 20Liter/Min
MAX FILLING HEIGHT : 40mm
LOWER PUNCH ADJUSTABLE RANGE : 0~40mm
- MACHINE DIMENSION LENGTH : 720mm
WIDTH : 1,160 mm
HEIGHT : 2,100 mm
- WEIGHT APPROX 1,200KG
PRODUCTION CAPACITY
| BEAD DIAMETER | BEAD PRODUCTION/HOUR | DAILY BEAD PRODUCTION (8 hours) | Remarks |
| 6.3mm | approx.450 | approx. 3,600 | single cavity mold |
- Performance information may be used only as guide for production capacity estimation of cold press machine.
- Variations in matrix powders can influence positively or negatively up to 20% of the production capacity of cold press.
NOTE
This technical data may be used only for guideline of production. DIEX Corp. will reserve the right to introduce any technical modification to its own machines, also in contract acquired, which its irrevocable decision are improvements. Therefore, any datum given on the catalogues & and data sheet has only indicative value.
Advanced Machines & Equipment for Diamond Tools
DIEX CORP.
www.diex.com / sales@diex.com / T. +82 70-8877-4563 / F. +82 2-6442-3804