Full Auto Gang Saw Shank Cleaning Machine: FC500GA

Full Auto Gang Saw Shank Cleaning Machine

MODEL NO.  FC500GA

This machine is designed for cleaning of Gang Saw Blade which was lusted and dirty after cutting, in full auto loading & unloading via trolley via 3 cleaning heads & separate two vertical dry cleaning heads to clean side plates edge parts , in full auto continuously without labor.

TECHNICAL DATA

TECHNICAL SPECIFICATIONS              

1.Model：FC500GA

2.Power:380V,3P.50/60Hz

3.Power Consumption：Approx.50KW

 - Abrasive stone Rotation Motor(Head1)：5.5KW

 - Abrasive Stone  Rotation Motor(Head 2)：5.5KW

 - Steel Brush Rotation Motor(Head3): 3KW

 - Reduction Motor:1.5Kw - Dryer：5.5KW

 - Edge Cleaning others:15KW

 4.Penumatic Cylinder:Dia.63x75mm 0.2Mpa

                  Steel Brush:Dia.195x50mm

  (Consumption:6000M/plate Mesh:60# Steel Brush

   Abr.consumption:140M/set 3 stone)

5.Cleaning Range：width 180mmx endless length

6.Productivity：approx.4m/min

7.Working Table Height：750mm

8.Total:Approx.11,250Lx2,500Wx2,000mmH

     Machine Dimension：2,050L×1,200W×2,150Hmm

     Roller Bench:  4,400Lx380Wx770mmH

     Edge Cleaning Bench(including dryer):   5,000Lx1,500Wx2,000mmH 

     Trolley: 4,000Lx380Wx800mmHx2 pcs

9.Weight :Approx.3,500kg

10.PLC controlled in automatic way

11.Cooling water recycled.

12.All safety standard & alarm system

NOTE

This technical data may be used only for guideline of production. DIEX Corp. will reserve the right to introduce any technical modification to its own machines, also in contract acquired, which its irrevocable decision are improvements. Therefore, any datum given on the catalogues & and data sheet has only indicative value.

Advanced Machines & Equipment for Diamond Tools
DIEX CORP. 
www.diex.com / sales@diex.com / T. +82 70-8877-4563 / F. +82 2-6442-3804