Auto Blade Polishing Machine : FC350A

Auto Blade Polishing Machine / FC350A

This machine is designed to polish blade in automatic way, auto loading & unloading. Polishing blades by      sand belt and clean margin area by steel brush, which will increase productivity and less labor.

Once polishing of one side blade is finished, operator must move the blades and polish the other side of      blades in auto way.

TECHNICAL DATA

Electric Power	5KVA
Blade Diameter	F115 to F350
Grinding Belt Speed	20~39meter/min
Turn Table Size	F360
Turn Table Rotation Speed	450~1,200RPM
Overall Dimensions	Approx.2,615W x 2,440L x 1,820Hmm
Weight	Approx. 1,500 kg
Saw Diameter in mm	350(14")
Both Side Grinding & Cleaning Time per Blade	Approx. 140 sec
Saw production per 8 hours	Approx. 200
Saw production per month	Approx. 5,000

IMPORTANT FACTS

• Performance information may be used only as a guide for production capacity estimation of grinding machine.
• Calculation of above grinding, dressing, and steel cleanin time are with nominated abrasive grinding wheels on cobalt based matrix segments. 

• Blade must be tensioned, average removal 0.10 to 0.20mm.

• Abrasive belt type to polish shank of diamond cutter diameter 100-300.

NOTE

This technical data may used only for guideline of production. DIEX Corp. will reserve the right to introduce any technical modification to its own machines, also in contract acquired, which is irrevocable decision are improvement, therefore, any datum given on the catalogue & data sheet has only indicative value.

Advanced Machines & Equipment for Diamond Tools
DIEX CORP. 
www.diex.com / sales@diex.com / T. +82 70-8877-4563 / F. +82 2-6442-3804