Vertical Tension Machine with Controller (Model No.: VTC4/20)
(TENSIONING ALL IN ONE)
1. Checking tension & Side run out (flatness) in vertical way
2. Tension rolling in vertical way (no need move down for horizontal rolling)
3. Elevator of blade by electric motor will be very convenient for operator especially heavy big blade
4. Tension & side run out checking not only 90 degree but also from 80 to 130 degree for different material to be cut.
5. Side run out correction by rolling using installed special device without hammering.
SIDE RUN OUT CORRECTION (EXAMPLE)
BEFORE
AFTER
Automatic tensioning and controlling for circular saw blades at same machine. Passible
diameter is from 400mm to 2000mm. The shank should be vertically loaded & unloaded on the
machine and tensioning & controlling at the same conditions without removing shank tension
checking and tensioning carried out on the same spindle
Machine has special device to correct side run out by rolling wihtout hammering
MACHINE FEATURES
- It consists of a table with control spindle mounted on precision bearing with precision flange.
- Pneumatic piston with constant unidirectional trust, is controlled and movement of the transducer and plotting unit trolley.
- Shank locking by Pneumatic system.
- Slope angle of two roller could be adjusted
- Automatic shank rotation or manual shank rotation and automatic checking of tensioning
- Non contact linear sensor able to check deflection within 0.01mm.
- Fully computerized system allows creating & visualizing tension graphics & deviation.
- All technical data of tension &control could be stored on hard disc or USB
TECHNICAL DATA
| Model No. | VTC4/20 |
| Power Supply | 380V 60HZ (Different Voltage and Frequencies on request) |
| Power Consumption | 5KW |
| Working Range | 400~2,000mm |
| Adjustable Pressure Force | from 500kg to 7,000kg |
| Pusher Angle Adjustable | 80~150 Degree |
| Roll speed | 28 rpm Variable |
| Roll radius | 50mm |
| Tension Control Pushing Force | 5kg to 30 kg |
| Shank Rotation | 1-14 RPM |
| Overall dimensions | L3240 x W1100 x H2400mm |
| Weight(Indicative_ | 1,800kg |
OPTIONS
| MODEL NO | TENSION RANGE |
| VTC2/8 | 200~800mm |
| VTC3/12 | 300~1,200mm |
| VTC4/22 | 400~2,200mm |
| VTC4/25 | 400~2,500mm |
| VTC4/30 | 400~3,000mm |
Advanced Machines & Equipment for Diamond Tools
DIEX CORP.
www.diex.com / sales@diex.com / T. +82 70-8877-4563 / F. +82 2-6442-3804