CDL : Core Drill Laser Welding Machine
CDL : Core Drill Laser Welding Machine
1) Crown Type(10~50mm) as option
2) Core Drill(50~350mm) Length up to 600mm
Diameter extension by option from 350mm up to 600mm
Length extension by option from 600mm up to 1200mm
1. Feature Features
1) Mount the core drill vertically. The core drill is clamped with a pneumatic cylinder, and the installation is simple, the structure is simple and efficient, so the welding precision and service life can be guaranteed, and the maintenance is simple. The tip mounting position and the operating direction are located in the same direction.
2. Wide welding range, perfect function, using HMI controller.
It uses a 10-inch touch screen and consists of 7 servo motors and 2 stepping motors. The laser automatically adjusts the tip symmetry and automatically reaches the position according to the core drill diameter. The welding gap is precisely controlled by laser measurement and servomotor, and the tip is supplied by servomotor. The welding head moves with a 3-axis servo motor according to the R value, and the welding is stable and precise, and it is easy to adjust according to the core drill of different diameters.
3. By installing an industrial camera, the welding position can be enlarged and observed.
4. Install the 2nd layer protection in the laser direct pipeline area, and the door is installed to ensure safety.
5. The laser generator uses China brand 3KW Fiber laser generator. The quality is good, the light decay is small, and the energy export is stable.
6. The chiller uses two temperature-controlled chillers to prevent dew from forming on the laser head even in a high-temp. environment.
2. Technical data
Welding Diameter: 18-400mm
Welding Length: 80-550mm
Tip size: H: 7-15mm, W: 1-6 mm, L: 14-26mm, Crown tip: H: 7-15, φ18-80mm
Welding speed: 0-50mm/s adjustable
Welding power: 0-3kw adjustable
Weld thickness: 0-5mm
Laser Generator Power: 3KW, 3P, 380V
Welder Power: 1.5KW, 1P, 220V
Chiller Power: 5KW, 3P, 380V
Air consumption: 0.4-0.6 MPa, 120 L/min
Shielding gas: 0.5MPa, 5-10L/min
Equipment Dimensions and Weight: 1200L*1700W*2000H(mm) , 700kg
Laser Generator Dimensions and Weight: 650L*450W*150H(mm), 80kg
Chiller Dimensions and Weight: 1000L*600W*1400H(mm), 70kg
NOTE
This technical data may be used only for guideline of production. DIEX Corp. will reserve the right to introduce any technical modification to its own machines, also in contract acquired, which its irrevocable decision are improvements. Therefore, any datum given on the catalogues & and data sheet has only indicative value.
Advanced Machines & Equipment for Diamond Tools
DIEX CORP.
www.diex.com / sales@diex.com / T. +82 70-8877-4563 / F. +82 2-6442-3804