AUTO WIRE BEAD COLD PRESS : WP5A

Automatic cold press for green compacting wire saw bead with granulated metal powders

AUTO WIRE BEAD COLD PRESS / MODEL:WP5A

Automatic cold press for green compacting wire saw bead with granulated metal powders, designed to be fitted upon diamond wire saws with two cavities +color touch monitor Fully electronic adjustment of weighing height by encorder.

TECHNICAL DATA

MODEL NO	WP 5A
POWER SUPPLY (DEFERNT VOLTAGE AND FREQUENCIES ON REQUEST)	380V 50/60HZ 3 PHASES
MAX. POWER CONSUMPTION	8KVA
COMPRESSOR FORCE	Hydraulic Pressure FROM 1,000 TO 5,000KG
AIR PRESSURE SUPPLY	6~8 BARS 50Liter/Min
WATER REQUIREMENT	10 LITER/MIN
MAX.FILLING HEIGHT	40MM
LOW PUNCH ADJUSTABLE RANGE	0-40MM
MACHINE PART OVERALL DIMENSIONS	LENGTH : 700mm WIDTH :950mm HEIGHT :1850mm
HY'D UNIT PART OVERALL DIMENSIONS	LENGTH :1150mm WIDTH : 950mm HEIGHT :1050mm
WEIGHT(INDICATIVE)	MACHINE(450Kg)+HY'D UNITE( 400 Kg)= Approx 950KG

PRODUCTION CAPACITY

BEAD DIAMETER	BEAD PRODUCTION/HOUR	DAILY SAW PRODUCTION (8Hours)	Remarks
10.5 mm	800	6,400	dual cavity mould
11mm	800	7,000	ditto

Performance information may be used only as guide for production capacity estimation of cold press machine. Variations in matrix powders can influence positively or negatively up to 20% of the production capacity of cold press.

Advanced Machines & Equipment for Diamond Tools
DIEX CORP.
www.diex.com / sales@diex.com / T. +82 70-8877-4563 / F. +82 2-6442-3804

WP5A : Auto Wire Bead Cold Press

Attached files

공유하기